Beamline Instrument Software Support |
|
SPEC Macro documentation:
[ Macro Index |
BCU Home ]
|
frelon.mac | ||||||
[ source code | installed at | configured at ] | ||||||
See other macros in category: Detection Ccd Obsolete | ||||||
Description:
| ||||||
Documentation:
That Frelon CCD Camera delivers images through the SDV bus. The Camera is controlled (start, stop, preset...) through the Serial Line. The maximum presetable exposure time is 1.7 second, but you can easily overcome that limit by hard-gating the camera, eventually coupled to a shutter, with the Vct6 Timer. This is automatically done from standard scans command and general camera commands. See also %{%<a HREF=camera_doc.html>camera.mac</a>%}%. SETUP The work station must be a Sun Solaris.
DEPENDENCIES - The file frelon.mac has to be read in it uses: camera.mac | ||||||
Macros:
Usage: f3setup [serline] [sleep] [expos] [prefix] [vct6] Set up the camera and the macros. [serline]: configured serial line number in spec config. [sleep]: sleep time for serial line output in ms. [expos]: exposure time in s. [prefix]: file prefix to store images. [vct6]: vct6 channel device server name.That camera is then addressable from scans and standard camera commands. see camera.mac f3settime Usage: f3settime [exposure] Presets the camera exposure time. Maximum is 1.7 seconds. f3menu Usage: f3menu Frelon Menu to talk directly to the camera controller. A lot of parameters can be configured this way. f3live Usage: f3live Reads in images one by one in an endless loop. hit "~" key to exit, or control-C. f3takemem Usage: f3takemem Reads in one image. f3sendfile Usage: f3sendfile Sets the camera up using a special configuration file. | ||||||
Internal Macros: | ||||||
Usage: f3_vct6start Starts counting on the Vct6. f3_vct6stop Usage: f3_vct6stop Stops counting on the Vct6. f3_flush Usage: f3_flush Flushes data away from the serial line. f3_vct6init Usage: f3_vct6init Sets the vct6 to gate out the camera. f3_init Usage: f3_init Sets the camera in one by one image mode f3_dump Usage: f3_dump Flushes data away from the serial line and prints out those data. | ||||||
|