Beamline Instrument Software Support |
|
SPEC Macro documentation:
[ Macro Index |
BCU Home ]
|
MACHINFO.MAC | ||||||
[ source code | installed at | configured at ] | ||||||
See other macros in category: X-ray beam Accelerator | ||||||
Description:
| ||||||
Documentation:
This macro set allows you: Once the misetup macro has been executed: EXAMPLE misetup These lines will be included in your scan header: #UMI0 Current AM SH U42_Gap U42_Taper #UMI1 130.00 OFF FE Open 29.99 0.02 #UMI2 Refill in 7457 sec, Message: 17/10/2025-05:34 END OF RUN 25-8.The previous information is an example for an insertion device beamline and varies accordingly for a bending magnet beam Version: $Revision: 4.38 $ DEPENDENCIES Functions here might use functions from ID_tango.mac | ||||||
Macros:
Usage: MI_debug toggle debug mode for the present macros. misetup Usage: misetup No arguments! Initializes parameters to access the information from the machine. mistop Usage: mistop After this command spec will not longer read the machine info and it will not be included in the scan header anymore. With mistart you can switch the reading on again. machinfo Usage: machinfo Display machine information on the SPEC screen miread Usage: miread <mode?> Reads information from machine FE tango DS (as of April 2012) michkon Usage: michkon [<refill-time>] [<waittime>] Activates refill feature on chk_beam. <refill-time> is the time before a refill whithin scans will wait for refill if no parameter is given, a default of 15 seconds is set. Minimum value is 10 seconds. <waittime> is the time to wait once the beam is back. Allows to wait for the undulators to close, optic to heat up ... michkoff Usage: michkoff %MDESC Deactivates refill feature on chk_beam previously activated by michkon mi_set_automatic_mode Usage: mi_set_automatic_mode %MDESC Enables the automatic mode : FE will automatically re-open after a refill. mi_SR_Current Usage: mi_SR_Current () Returns the synchrotron ring current in mA. mi_SR_Current_fast Usage: mi_SR_Current_fast () Returns the synchrotron ring current in mA. (fast but less safe version) mi_festate Usage: mi_festate () Returns the front end state as a string mi_intlck_pss Usage: mi_intlck_pss () Returns non zero if PSS interlock is active mi_intlck_exp Usage: mi_intlck_exp () Returns non zero if EXP interlock is active mi_intlck_fe Usage: mi_intlck_fe () Returns non zero if FE interlock is active mi_intlck_hqps Usage: mi_intlck_hqps () Returns non zero if HQPS interlock is active mi_automode Usage: mi_automode () Returns non zero if automatic front end mode is on mi_autotime Usage: mi_autotime () Returns the remaining time for automatic front end mode mi_autotime_str Usage: mi_autotime_str () Returns the remaining time for automatic front end mode waitforrefill Usage: waitforrefill [<check_time> [<wait_time>]] waitforreffill can be used directly without a parameter, behaviour will then depend on previous michkon / michkoff. With a parameter, on/off is ignored and the wait is done with the value in the first argument. An additional parameter can be used to wait for <wait_time> seconds after beam is back (Ex: to wait for heating or end of cleanup). wait_for_beam Usage: wait_for_beam Waits machine not to be in Injection mode and frontend open. feopen Usage: feopen Open the frontend shutter from SPEC feclose Usage: feclose Close the frontend shutter from SPEC mioff Usage: mioff Disable all storage ring counters. mion Usage: mion Enable all storage ring counters. | ||||||
Internal Macros: | ||||||
Usage: minfounsetup mistart Usage: mistart Adds machine info at the header of each scan mishow Usage: mishow __mi_tango_catch_error Usage: __mi_tango_catch_error __MI_error Usage: __MI_error (mesg) Attempts to write indentical error message only once in a while mi_Fheader Usage: mi_Fheader Macro that formats information for including it in the scan headers. _miIDshow Usage: _miIDshow Screen formatting for ID beamlines. _miIDpositions Usage: _miIDpositions() Return positions as a formatted string. as demanded by ID1/2 mibody Usage: mibody(mode) macro to include start/stop on blmenu mi_refilltime Usage: mi_refilltime () Returns the remaining time to refill. mi_message Usage: mi_message () Returns the operator message. mi_lifetime Usage: mi_lifetime () Returns the lifetime. mi_mode Usage: mi_mode () Returns the operation mode as text: No mode validated, Injection, Beam Delivery mi_srmode Usage: mi_srmode () Returns the mode as text: USM, MDT etc. ___fe_filling_mode Usage: ___fe_filling_mode (<flag>) Check if the accelerator filling mode. mi_chkbeam Usage: mi_chkbeam %MDESC chk_beam stuff mi_measure0 Usage: mi_measure0 mi_measure0 replaces mi_chkbeam. It loops until refill is finished. This is done without counting which avoids to trig counting cards and detectors. ___feopen Usage: ___feopen Open the frontend shutter from SPEC idopen Usage: idopen idclose Usage: idclose ___fe_state Usage: ___fe_state () ___fe_pollfe Usage: ___fe_pollfe (<what>) Some complementary info: Attribute FE_State can deliver the following answers: "FE open", "FE closed", "FE fault", "FE disabled", "FE unknown" id_pollfe Usage: id_pollfe (<what>) <what> : state in {"close"; "open"} macro to replace possibly needed macro from the old id.mac ___fe_check Usage: ___fe_check (<flag>) Check if the front end is open. Open it if flag set. _check_fe Usage: _check_fe (<flag>) VINTAGE function to check if the front end is open. Open it if flag set. Only this old version is being used in other macros and they expect a numeric value to be returned according to the old taco DS. Old state values of the frontend were: 0 (unknown), 3 (close), 4(open), 17 (automatic), 23 (fault), 46 (disabled) or -1 iferror. SRCUR_config Usage: SRCUR_config (cnum, type, unit, mod, chan) Declare a counter controller: SCALERS DEVICE ADDR <>MODE NUM <>TYPE YES SRCUR 2 Macro CounterNo address is necessary, as it will be taken from misetup. Then create macro counters in a similar manner: Unit is index num of controller, channel 0 is for the storage ring current, 1 for single bunch current. Number Name Mnemonic Device Unit Chan <>Use As Scale Factor 3 srcur srcur MAC_CNT 2 0 counter 1 4 sbcur sbcur MAC_CNT 2 1 counter 1 Called by spec Note: the internal variable SRCUR_addr will not be used. Please use misetup. SRCUR_cmd Usage: SRCUR_cmd (cnum, attr, p1, p2, p3) Channel 0 will return the SR current and channel 1 the single bunch current. Called by spec Note: the internal variable SRCUR_addr will not be used. Please use misetup. _miidread Usage: _miidread Reading insertion devices from the old taco servers. _miidwrite Usage: _miidwrite scan header output with the old taco servers. _miidshow Usage: _miidshow Screen formatting for the old taco servers. id_state Usage: id_state () Get state of all undulators function which copies behaviour of the old id_state() from the old id.mac Return the state of the frontend -> 0 (unknown), 3 (close), 4(open), 17 (automatic), 23 (fault), 46 (disabled) or -1 iferror. mi_get_mode Usage: mi_get_mode() mi_mode_is_USM Usage: mi_mode_is_USM() | ||||||
|