Beamline Instrument Software Support |
|
SPEC Macro documentation:
[ Macro Index |
BCU Home ]
|
multimca.mac | ||||||
[ source code | installed at | configured at ] | ||||||
See other macros in category: Detection MCA | ||||||
Description:
| ||||||
Documentation:
saveload.mac sps.mac | ||||||
Macros:
Usage: MultiMCA_debug Toggles the debug mode. if (!(whatis("__MultiMCA_debug") & 2)) rdef __MultiMCA_debug \'#$*\' getval_one_char Usage: getval_one_char (<message>, <default>) Prompts for a single letter until a unique one is entered. mcalist Usage: mcalist List all configured MCA devices and their state mcaon Usage: mcaon [<device_no>] Set all MCA devices ON, or only <device_no> If device is on, it is used in standard acquisition macros (scans, ct) mcaoff Usage: mcaoff [<device_no>] Set all MCA devices OFF, or only <device_no> mcaactive Usage: mcaactive [device_no] Set MCA device number <device_no> ACTIVE. If device is active, it is used in mca acquisition macro (mcaacq) mcainactive Usage: mcainactive [device_no] Set MCA device number <device_no> INACTIVE. mcasetup Usage: mcasetup <no> [<size> <num> <tmode> <sync> <noclear> <gui> <scan> <acq> <std> <prefix> <red> <fmt> <whole> <type>] MCA device setup If no arguments, or only <no>, run an interactive menu. If arguments are given, setup mca silently Arguments are: no: device number as in spec config size: memory size (default read from device) num: memory group number (default 0) tmode: time mode = 0:real time, 1:live time (default 0) sync: sync mode = 0:Internal, 1:External (default 0) noclear: do not clear buffer between several mcaacq (default 0) scan: save spectrum during scans (default 0) acq: save spectrum during mcaacq/ct (default 0) std: save spectrum to standard file (default 0) prefix: mca file prefix (default =\"data\") red: spectrum reduction factor (default = 1 = no reduction) fmt: file dump format as used in data_dump (default = %%16C) whole: read whole spectra or not (default = 0 - whole) type: MCA controller type AIM/MAX = 0, MMAX = 1, MUSST = 2 (default = 0-AIM) mcaacq Usage: mcaacq [counting_time] Do an acquisition for counting_time seconds or until manual stop if no time sp[ecified. mcastop Usage: mcastop [<device_no>] Stop acquisition on all active device or only on device_no. mcaclear Usage: mcaclear [device_no] Clear memory for all active device or only on device_no. mcapreset Usage: mcapreset [no] <preset_time> Set preset_time [s] for all active MCAs or only on MCA no. mcastart Usage: mcastart [no] Start acquisition for all active MCAs or only on MCA no. !!No preset time set inside this macro: use mcapreset before. mcaread Usage: mcaread [no] Read data and times for all active MCAs or only on MCA no. mcawait Usage: mcawait Wait for all device to stop counting mcakey Usage: mcakey On-line menu while waiting for acquisition to end. mcatimes Usage: mcatimes Print out live, real, dead times for all active devices. !!No read is performed: use macro mcaread before mcacalib Usage: mcacalib [ <no> <A> <B> <C> ] With no arguments, runs an interactive menu to set calib coeff. With input arguments, change the calibration shared array mcacalibmenu Usage: mcacalibmenu Interactive menu to change calibration for all devices mcacalibshow Usage: mcacalibshow Show current calibration of all devices mcacalibsave Usage: mcacalibsave [<filename>] Save current calibrations to file If no <filename> is specified, use default one. Default filename is BLISSADM/local/spec/userconf/mcacalib.USER mcacalibload Usage: mcacalibload [<filename>] Load MCA calibrations from file. This overrides current calibrations If no <filename> is specified, use default one. Default filename is BLISSADM/local/spec/userconf/mcacalib.USER mcaroi Usage: mcaroi [<roi_mne> <mca_dev> <roi_min> <roi_max> <roi_alias>] Define a new roi. If no arguments is given, call mcaroimenu. roi_mne : counter mnemonic mca_dev : mca device number roi_min : roi first channel roi_max : roi last channel roi_alias : roi alias mmax_ch : mmax channel (if appropriate) mcaroidel Usage: mcaroidel <roi_mne> Deletes ROI <roi_mne> mcaroimenu Usage: mcaroimenu Menu to Add/Modify/Delete/Save/Load rois mcaroishow Usage: mcaroishow Show ROIs definition mcaroisave Usage: mcaroisave [<filename>] Save current rois definition to file If no <filename> is specified, use default one. Default filename is BLISSADM/local/spec/userconf/mcaroi.def.USER mcaroiload Usage: mcaroiload [<filename>] Load rois definition from file. This overrides current rois definition. If no <filename> is specified, use default one. Default filename is BLISSADM/local/spec/userconf/mcaroi.def.USER mcaguion Usage: mcaguion [<no>] Set GUI ON for all mca device or just device <no> If not already opened, open gui if device is active mcaguiopen Usage: mcaguiopen [<device_no>] Open GUI for <device_no>, or for all active device if <device_no> not specified mcaguiclose Usage: mcaguiclose [<device_no>] Close GUI for <device_no>, or for all devices if <device_no> not specified mcasavelast Usage: mcasavelast Save last acquisition for all active devices Do not consider saving options: save all in mca files mcalineupon Usage: mcalineupon Read data from all mca ON (arrays MCA_DATAn) and save data in array MCA_DATA Data are written in MCA_DATA in the same order as in spec configuration mcalineupoff Usage: mcalineupoff Set lineup facility off. MCA_DATA is not updated anymore | ||||||
Internal Macros: | ||||||
Usage: _mcamsg(no, msg) Utility to print mca messages _mcalist Usage: _mcalist (no) short list of the MCA no configuration _mcamenu Usage: _mcamenu print the menu of all the set in the config MCAs _mcasubmenu Usage: _mcasubmenu (no) Configure the MCA no when using the mcasetup menu _mcaon Usage: _mcaon (no) Set MCA device no ON _mcaoff Usage: _mcaoff (no) Set MCA device no OFF _mcacheckoff Usage: _mcacheckoff() Since spec version 6, this pb is fixed so reconfig set auto_run to 0 When doing reconfig, spec sets auto_run to 1 even if mca is off in the macro. So, before counting, if mca is off (MCA_ON[]=0), we force auto_run to 0. This will avoid difference between MCA_ON and internal auto_run flag. mcaunsetup Usage: mcaunsetup _mcadefaults Usage: _mcadefaults (no) Setup defaults parameters for MCA device <no>. _mcasetup Usage: _mcasetup (no) Setup the MCA device no. If setup failed, the device is set inactive _mcaroisetup Usage: _mcaroisetup (no) Get the pseudo counter configuration for all defined for MCA device no ROIs. Return 0 if no ROI configured, nb of rois otherwise. _mcamemsetup Usage: _mcamemsetup (no) Setup memory parameters for device <no> Return 1 on success, 0 otherwise. _mcaio Usage: _mcaio (no, command, argument) Send command to device no. _mcacdef Usage: _mcacdef (no) Hooks MCA operation to the standard macros for device no. _mcadeldef Usage: _mcadeldef (no) Un-Hooks MCA operation to the standard macros for device no. _mcaarraycreate Usage: _mcaarraycreate (no) Create data array MCA_DATAno where no is the MCA device number. If the array already exists, check its size and eventually change it. _mcaarrayclear Usage: _mcaarrayclear (no) Reset data array MCA_DATAno where no is the MCA device number. _mcaarrayread Usage: _mcaarrayread (no) Read in data from MCA to array MCA_DATAno where no is the MCA device number. _mcanbactive Usage: _mcanbactive () Get number of active mca devices _mcastop Usage: _mcastop (no) Stop acquisition on device no. _mcaclear Usage: _mcaclear (no) Clear the memory and the arrays on MCA no. _mcaclearct Usage: _mcaclearct (no) Clear the memory and the arrays for MCA no if the device is on. _mcapreset Usage: _mcapreset (no, pt) Set preset time to pt seconds on mca device no. _mcastart Usage: _mcastart (no) Start acquisition on MCA no. _mcareadct Usage: _mcareadct (no) read out data from mca device no Spectrum are stored in array MCA_DATA<no> Times are stored in array MCA_TIMES. To be used in user_getcounts. _mcaread Usage: _mcaread (no) read out data from mca device no Spectrum are stored in array MCA_DATA<no> Times are stored in array MCA_TIMES _mcatimes Usage: _mcatimes (no) Read mca times and save it in array MCA_TIMES _mcacalibget Usage: _mcacalibget (no) Return the calibration for MCA no. _mcacalibshow Usage: _mcacalibshow() _mcacalib Usage: _mcacalib (no, ca, cb, cc) Change calibration coeff for mca no. _mcaroishow Usage: _mcaroishow() _mcaroiadd Usage: _mcaroiadd (dev, cnt, min, max, alias) Add roi in the list _mcammaxroiadd Usage: _mcammaxroiadd(dev, emin, emax, alias, mmax_ch, nb) _mcagetE Usage: _mcagetE (nb, ch) Return the energy [keV] as function of the channel ch for the MCA number nb _mcagetch Usage: _mcagetch (nb, en) Return the channel as function of the energy en [keV] for the MCA number nb _mcaroidel Usage: _mcaroidel (cnt) Delete roi from the list _mcareadroi Usage: _mcareadroi(no) _mcaroicounts Usage: _mcaroicounts (cnt) Hook macro to update roi counter's value _mcaguion Usage: _mcaguion (no) Set GUI ON for device <no> mcaguioff Usage: mcaguioff [<no>] Set GUI OFF for all device or just device <no> Close gui if opened. _mcaguioff Usage: _mcaguioff (no) Set GUI OFF for device <no> _mcaguiopen Usage: _mcaguiopen(no) _mcaguiclose Usage: _mcaguiclose(no) _mcaguistart Usage: _mcaguistart(no) mcasavescanheader Usage: mcasavescanheader <device_no> Save MCA specific header during a scan mcasavescandata Usage: mcasavescandata <device_no> Save MCA data during a scan mcasavect Usage: mcasavect Save mca header and data after a ct mcasaveacq Usage: mcasaveacq Save mca header and data after a mcaacq mcasavestandard Usage: mcasavestandard(nb, std, inct) Save mca header and data in standard spec datafile _mcasavestandard Usage: _mcasavestandard (nb, std, inct) mcasaveprivate Usage: mcasaveprivate (no) Save MCA header and data in a private file Return 1 on success, 0 otherwise mcafilename Usage: mcafilename (no, inscan) Create filename for specific mca files savemultimcaheader Usage: savemultimcaheader (file, no, withtime) Save MCA specific header for device <no> If <withtime>!= 0, save counting, live and real times Return 1 on sucess, 0 otherwise savemultimcadata Usage: savemultimcadata (file, no) Save MCA spectrum data for device <no> Return 1 on sucess, 0 otherwise _mcadatareduction Usage: _mcadatareduction (no) Computes reduction on MCA_DATA<no>. Results are stored in MCA_DATARED<no> _mcalineupsize Usage: _mcalineupsize () Computes size needed for MCA_DATA to store all MCA_DATAn arrays _mcalineupdata Usage: _mcalineupdata Macro used in all read hooks to fillup MCA_DATA _mcalineupclear Usage: _mcalineupclear Clear MCA_DATA mcatype Usage: mcatype _mcatype Usage: _mcatype(no, type, flag) | ||||||
|