				TANGO
				Device Servers

Tango Device Server Classes List

Class Index :
A B C D E F G H I J K L M O P Q R S T V W X C

Class:	AdcDac
Module:	AdcDac
Family:	InputOutput
Author:	vedder (ESRF)
Revision:	release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/AdcDac/index.html

Description:

This Class wil have a 'value' attribute. This attribute is read on an Adc channel and is written on a Dac channel. Its state will be FAULT if one of the 2 devices Adc or Dac is in Fault. Its state will be UNKNOWN if one of the 2 devices Adc or Dac is in UNKNOWN state.

Class:	AdcMotor
Module:	adcmotor
Family:	Motion
Author:	bourtemb (ESRF)
Revision:	AdcMotor-Release_1_4_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/adcmotor/index.html

Description:

This class allows to control a motor. The position can be read directly from the motor counter or from an adc entry connected to the motor.

Class:	AttributeMonitor
Module:	AttributeMonitor
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/AttributeMonitor/index.html

Description:

This device server is intended to monitor some attributes values, cto heck the values versus a reference and to trig a voice alarm when required.

Class:	Beamloss
Module:	Beamloss
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/Beamloss/index.html

Description:

This device is intended to control and monitor a beamloss.

Class:	Bilt
Module:	Bilt
Family:	PowerSupply
Author:	meier (??)
Revision:	Bilt-Release_3_9
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Bilt/index.html

Description:

The BILT multi channel power supply will be used with 3 channels for the ESRF fast feedback systems. The power supply can be controlled in 2 ways : By this device server for slow or human control or by the Libera Beam Position monitors for fast feedback with closed loop control. The devices are exported as one device per steerer magnet. Every device has three channels. The channels (poles) cannot be switched on individually but have their individual set points and measurement values.

Class:	BiltCh
Module:	BiltCh
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	BiltCh-Release_1_6
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/BiltCh/index.html

Description:

The Bilt multi channel power supply has three individual channels. This class offers an interface to an individual channel of the power supply.

Class:	BpmLiberaClock
Module:	BpmLiberaClock
Family:	BeamDiag
Author:	anatoly.kolozhvari (??)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/BpmLiberaClock/index.html

Description:

Tango Device Class

Class:	BpssTunning
Module:	BpssTunning
Family:	PowerSupply
Author:	verdier (ESRF)
Revision:	BpssTunning-Release_1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/BpssTunning/index.html

Description:

Read a Vdsp71Wrapper device to tune ESRF booster power supply system.

Class:	Bruker
Module:	Bruker
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	Bruker-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Bruker/index.html

Description:

This class will manage the Bruker power supplies.

Class:	BrukerMch
Module:	BrukerMch
Family:	PowerSupply
Author:	vedder (ESRF)
Revision:	BrukerMch-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/BrukerMch/index.html

Description:

Bruker MultiChannel Power Supply Class

Class:	BrukerMchWrapper
Module:	BrukerMchWrapper
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	BrukerMchWrapper-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/BrukerMchWrapper/index.html

Description:

This class is a Wrapper to control the Bruker multi channels power supplies via the taco devices.

Class:	BrukerWrapper
Module:	BrukerWrapper
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	BrukerWrapper-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/BrukerWrapper/index.html

Description:

This device server is a wrapper Tango to control the Bruker power supplies of TL2. It will send commands to the taco devices.

Class:	Bsm
Module:	bsm
Family:	Measures
Author:	peru (ESRF)
Revision:	V3_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/bsm/index.html

Description:

A class which performs a scan with an XBPM motorisation while getting measures from a Brehmstrahlung sensor.

Class:	Bumper
Module:	Bumper
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	Bumper-Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Bumper/index.html

Description:

The bumper powersupplies are pulsed powersupplies. They are used to deviate the beam from the booster into the transfer line 2.

Class:	BunchClock
Module:	BunchClock
Family:	RadioFrequency
Author:	kolozhva (ESRF)
Revision:	BunchClock-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/RadioFrequency/BunchClock/index.html

Description:

This class will allow to control the ESRF bunchclock.

Class:	CPCI412
Module:	cpci412
Family:	InputOutput
Author:	pons (ESRF)
Revision:	REL1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/cpci412/index.html

Description:

A class to control the ADAS cpci412 acquisition board and log data.

Class:	CryoCtrl
Module:	cryoctrl
Family:	InputOutput
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/cryoctrl/index.html

Description:

this class controls a cryogenic generator connected to a wago controller. It supposes that 4 signals are connected to 4 ADC channels of the controller. the 4 signals are: Temperature suppy, temperature return, pressure supply and pressure return It uses the WagoAdc classe. It calculates the extracted power with these 4 items

Class:	CryoWrapper
Module:	cryo_wrapper
Family:	TACO_Interfaces
Author:	meyer (ESRF)
Revision:	CryoWrapper-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/cryo_wrapper/index.html

Description:

A wrapper class for the TACO device server controlling the cryo system.

Class:	Cubds
Module:	cub-server
Family:	InputOutput
Author:	epaud (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/cub-server/index.html

Description:

This class allows to access the inputs and outputs registers of the AMCC used as PCI interface on the CUB cards. It is undependant of the FPGA embedded application.

Class:	CurrentTransformer
Module:	CurrentTransformer
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/CurrentTransformer/index.html

Description:

This device server is dedicated to the control of the new current transformer (new CT + Keithley 6220 current source + Keithley 2701 digital multimeter).

Class:	DCLoad
Module:	DCLoad
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/DCLoad/index.html

Description:

This class allows to show the load of a datacollector server.

Class:	Dac712
Module:	Dac712
Family:	InputOutput
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/Dac712/index.html

Description:

This class will allow to manage an icv712 board.

Class:	Dan8100Ch
Module:	Dan8100Ch
Family:	PowerSupply
Author:	peru (ESRF)
Revision:	Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Dan8100Ch/index.html

Description:

Control of TL1 power supplies.

Class:	Danfysik
Module:	Danfysik
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Danfysik/index.html

Description:

This class will manage the Danfysik System 8000 and 8100 Powersupplies

Class:	DiamondID14eh3
Module:	diamond
Family:	Beamlines
Author:	meyer (ESRF)
Revision:	DiamondID14eh3-Release_3_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Beamlines/diamond/index.html

Description:

The single crystal diamond monochromator of the ID14-3 beamline is used to select an energy on the X ray beam. The energy is depending on the angle of a crystal inserted in the beam. we can tune the angle, tilt the crystal and do a lateral translation. There is also a possibility to select one crystal over 3. The device is cooling by a water circuit from which we can read the temperature at several points. A platinium foil associated to a pin diode can be temporarly inserted in the beam to calibrate the energy. All the motors are controlled by Paragon controllers. Input and output are made via a Wago field bus.

Class:	Diris
Module:	Diris
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/Diris/index.html

Description:

This device server is intended to monitor the values of interest collected for a specified Diris device. The values are acquired through the DirisCollector device server.

Class:	DirisCollector
Module:	DirisCollector
Family:	PowerSupply
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/DirisCollector/index.html

Description:

This device server is intended to collect data from Diris slaves connected to a Diris concentrator.

Class:	Dmm4070
Module:	Dmm4070
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/Dmm4070/index.html

Description:

This class is intended to drive a National Instruments digital multimeter type 4070.

Class:	ElecLogger
Module:	ElecLogger
Family:	PowerSupply
Author:	goudard (ESRF)
Revision:
Language:	Java
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/ElecLogger/index.html

Description:

Java server for drops logging on electric network.

Class:	Elecdrops
Module:	elecdrops
Family:	PowerSupply
Author:	goudard (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/elecdrops/index.html

Description:

This server reads TACO vdsp71_cs server and format data for Electric drops client.

Class:	Emittance
Module:	emittance
Family:	Measures
Author:	poncet (ESRF)
Revision:	Emittance-Release_3_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/emittance/index.html

Description:

Tango Device Class

Class:	Encoder
Module:	Encoder
Family:	InsertionDevices
Author:	penel (ESRF)
Revision:	Encoder-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InsertionDevices/Encoder/index.html

Description:

Classe writen to read an encoder

Class:	Encoder
Module:	ID_eleta
Family:	Motion
Author:	penel (ESRF)
Revision:	Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/ID_eleta/index.html

Description:

Classe writen to read an encoder

Class:	EnergySpread
Module:	EnergySpread
Family:	BeamDiag
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/EnergySpread/index.html

Description:

This device server calculate the beam energy spread.

Class:	FOFBManager
Module:	bpm_libera_cspi1-8x
Family:	Measures
Author:	pons (ESRF)
Revision:	REL1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/bpm_libera_cspi1-8x/index.html

Description:

A class to manage libera network links and status of the Fast Orbit FeedBack

Class:	FastShutter
Module:	fast_shutter
Family:	Beamlines
Author:	meyer (ESRF)
Revision:	FastShutter-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Beamlines/fast_shutter/index.html

Description:

The class wraps the microdiff attributes for the fast shutter handling into one device with a proper state and commands.

Class:	FastSteerer
Module:	FastSteerer
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/FastSteerer/index.html

Description:

This device server is intended to control the fast steerers.

Class:	FeWrapper
Module:	frontend_wrapper
Family:	TACO_Interfaces
Author:	meyer (ESRF)
Revision:	FeWrapper-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/frontend_wrapper/index.html

Description:

Tango server to wrap the FrontEnd TACO server.

Class:	FluidsData
Module:	Data
Family:	Miscellaneous
Author:	meyer (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/Data/index.html

Description:

Read data drom the infrastructurre system and present it as attributes

Class:	FluidsStates
Module:	States
Family:	Miscellaneous
Author:	meyer (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/States/index.html

Description:

A class on top of the OPCplc class to translate the states of the fluid circuits read via OPC to TANGO states and status.

Class:	Gesdac2b
Module:	Gesdac2b
Family:	InputOutput
Author:	bourtemb (ESRF)
Revision:	Gesdac2b-Release_1_0_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/Gesdac2b/index.html

Description:

Gesdac2b single channel DAC class.

Class:	Hazemeyer_CIT
Module:	Hazemeyer_CIT
Family:	Measures
Author:	bourtemb (ESRF)
Revision:	Hazemeyer_CIT-Release_1_3_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/Hazemeyer_CIT/index.html

Description:

This class allows to control Hazemeyer CIT 8.4 APT power meter.

Class:	HdbAccessToFile
Module:	HdbAccessToFile
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	releasetag
Language:	Java
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/HdbAccessToFile/index.html

Description:

A HdbAccess (cpp class) simulator. It writes data in a file when HDB is down.

Class:	HdbBrowse
Module:	hdb_browse
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	HdbBrowse-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/hdb_browse/index.html

Description:

This class is able to read data to TACO HDB and return them in TANGO attribute history.

Class:	HdbConfigServer
Module:	HdbConfigServer
Family:	TACO_Interfaces
Author:	poncet (ESRF)
Revision:	start
Language:	Java
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/HdbConfigServer/index.html

Description:

This server allows creation of signals with external filling mode (mode7) in taco HDB. The server can be used by other device servers to create the signals in HDB without any need to do it manually.

Class:	HdbRead
Module:	hdb_read
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	HdbRead-Release_1_2
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/hdb_read/index.html

Description:

This class is able to read data to TACO HDB and return them in TANGO attribute history.

Class:	HdbSignalCtrl
Module:	hdb-ctrl
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	HdbSignalCtrl-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/hdb-ctrl/index.html

Description:

This class is able to control if specified signals are written in TACO HDB

Class:	HlsCaptor
Module:	hlscaptor
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/hlscaptor/index.html

Description:

This device server is intended to monitor HLS captors.

Class:	HlsConcentrator
Module:	hlsconcentrator
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/hlsconcentrator/index.html

Description:

This device is intended to collect and format the individual HLS captor values.

Class:	HlsCrate
Module:	hlscrate
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/hlscrate/index.html

Description:

This device server is intended to drive a Michat digital hydrostatic levelling system crate.

Class:	HqpsAlarm
Module:	HqpsBinOut
Family:	Hqps
Author:	goudard (ESRF)
Revision:	tata
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsBinOut/index.html

Description:

HqpsAlarm is a polled device server who access diffrent TACO device servers to display HQPS Alarms in the Control Room.

Class:	HqpsAlarm
Module:	HqpsAlarm
Family:	Hqps
Author:	goudard (ESRF)
Revision:	rtag
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsAlarm/index.html

Description:

This class creates a high level device which will send an e-mail in case it switches to the ALARM state

Class:	HqpsAlarm
Module:	hqps_alarm
Family:	Hqps
Author:	goudard (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/hqps_alarm/index.html

Description:

HqpsAlarm is a polled device server who access diffrent TACO device servers to display HQPS Alarms in the Control Room.

Class:	HqpsBearingTemp
Module:	HqpsBearingTemp
Family:	Hqps
Author:	taurel (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsBearingTemp/index.html

Description:

This class is part of the HQPS project. It is used to get a measurement of the rotating machine bearing temperature

Class:	HqpsBinIn
Module:	HqpsBinIn
Family:	Hqps
Author:	goudard (ESRF)
Revision:	tata
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsBinIn/index.html

Description:

This class is part of the HQPS project. Its aim i sto report the Wago PLC binary inputs. Each device has only a state which reflects the binary input value (OPEN/CLOSE). A device can also be in FAULT is the PLC software is not running

Class:	HqpsCellPressure
Module:	HqpsCellPressure
Family:	Hqps
Author:	taurel (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsCellPressure/index.html

Description:

This class is part of the HQPS project. IT is used to get a measurement of the pressure difference between oustside and the inside of the HQPS building cell

Class:	HqpsGlobalState
Module:	HqpsGlobalState
Family:	Hqps
Author:	goudard (ESRF)
Revision:	tata
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsGlobalState/index.html

Description:

This class imports hqps devices and calculate a global state for HQPS. The device imported are : - sys/hqps-rotating-machine/xy * x = {4,5,6,7,8,9,10} * y = {a,b} - sys/hqps-cb/d31 - sys/hqps-trans/ntr It also calculate the number of active rotating machines.

Class:	HqpsRotMachine
Module:	HqpsRotMachine
Family:	Hqps
Author:	goudard (ESRF)
Revision:	releasetag
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsRotMachine/index.html

Description:

This class is a high level class for the HQPS system. Each device is the summary of state and status for each HQPS rotating machine. One rotating machine means: One accumulator, one alternator, 3 circuit breakers (dlvx, d1 and d2), one transformer and one common

Class:	HqpsTemperature
Module:	hqps_temperature
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	HqpsTemperature-Release_1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/hqps_temperature/index.html

Description:

This class is able to read a taco device for HQPS temperature and to store value in TACO hdb.

Class:	HqpsVdspVib
Module:	HqpsVdspVib
Family:	Hqps
Author:	taurel (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsVdspVib/index.html

Description:

This class is part of the HQPS2 project. It manages a Vdsp71 board used to measure the HQPS2 Rotabloc vibrations

Class:	HqpsVib
Module:	HqpsVib
Family:	Hqps
Author:	taurel (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/HqpsVib/index.html

Description:

This class is used in the HQPS2 project. It is used to get all the data related to the vibration level measued on one Rotabloc and computed vi a DSP (VDSP71). One VDSP71 board maanges vibration for 10 Rotabloc

Class:	IDWrapper
Module:	IDWrapper
Family:	InsertionDevices
Author:	pons (ESRF)
Revision:	IDWrapper-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InsertionDevices/IDWrapper/index.html

Description:

A Tango Wrapper for the Taco IDds

Class:	IRMirror
Module:	ir-mirror
Family:	BeamDiag
Author:	taurel (ESRF)
Revision:	IRMirror-Release_2_5
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/ir-mirror/index.html

Description:

This class drives a mirror installed at the second dipole of cell 22. This mirror is used to deviate the IR part of the photon beam. The mirror is installed on a motor and has several thermoprobes which allows its positionning. This class is also used for the so-called "Fuse" device. This is exactly like the IR mirror but with only its "Slotted mode". A pre-processor variable called FUSE allows the Fuse device server generation.

Class:	Icv101
Module:	icv101
Family:	InputOutput
Author:	kimdon (ESRF)
Revision:	start
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/icv101/index.html

Description:

This device server controls the ADAS Icv101 ADC board.

Class:	Icv150
Module:	Adc150
Family:	InputOutput
Author:	vedder (ESRF)
Revision:	Icv150-Release_1_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/Adc150/index.html

Description:

This class will allow to control an ICV150 board.

Class:	IncaaAdc
Module:	IncaaAdc
Family:	InputOutput
Author:	bourtemb (ESRF)
Revision:	IncaaAdc-Release_1_0_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/IncaaAdc/index.html

Description:

Device server to control Incaa Analogic to Digital converter.

Class:	JHdbEventManager
Module:	JHdbEventManager
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	Release-JHdbEventManager_1_3
Language:	Java
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/JHdbEventManager/index.html

Description:

Class:	Keithley2701
Module:	Keithley2701
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/Keithley2701/index.html

Description:

This device server is intended to drive a Keithley 2701 digital multimeter (DMM). A 7706 multiplexer card must be installed inside the DMM, it is used for the calibration of the current transformer.

Class:	Keithley6220
Module:	Keithley6220
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/Keithley6220/index.html

Description:

This device server is intended to control a Keithley 6620 precision current source over a serial line.

Class:	KiKe
Module:	KiKe
Family:	PowerSupply
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/KiKe/index.html

Description:

Interface class for the booster extraction kickers Ki and Ke.

Class:	Kicker
Module:	Kicker
Family:	PowerSupply
Author:	vedder (ESRF)
Revision:	start
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Kicker/index.html

Description:

Interface class for the booster extraction Kicker Ki and Ke.

Class:	Kicker_v
Module:	kicker_v
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	Kicker_v-Release_1_8
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/kicker_v/index.html

Description:

Control of the vertical kicker installed in storage ring

Class:	Linac
Module:	linac
Family:	Linac
Author:	vedder (ESRF)
Revision:	Linac-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/linac/index.html

Description:

This class will manage the high level object controlling the linac. This object will allow the executions of sequences to put the linac in ON,OFF, STANDBY or LOW HEATING STATE.

Class:	LinacCooling
Module:	LinacCooling
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacCooling-Release_1_0_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacCooling/index.html

Description:

This class will manage the linac cooling.

Class:	LinacGun
Module:	LinacGun
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacGun-Release_1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacGun/index.html

Description:

This class will manage the gun of the linac. The gun is the electrons source of the accelerator. It defines the pulsed characteristics of the electron beam (duration, rate).

Class:	LinacGunAux
Module:	LinacGunAux
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacGunAux-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacGunAux/index.html

Description:

This class will manage the gun auxiliary of the Linac.

Class:	LinacGunHVPS
Module:	LinacGunHVPS
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacGunHVPS-Release_1_0_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacGunHVPS/index.html

Description:

The high voltage power supply will provide high voltage to the gun of the linac.

Class:	LinacHVPS
Module:	LinacHVPS
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacHVPS-Release_1_0_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacHVPS/index.html

Description:

The high voltage power supply will provide high voltage to the modulators and to the the gun modulator of the linac.

Class:	LinacModAux
Module:	LinacModAux
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacModAux-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacModAux/index.html

Description:

This class will manage the modulator auxiliaries of the Linac.

Class:	LinacModulator
Module:	LinacModulator
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacModulator-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacModulator/index.html

Description:

The linac is equiped with two identical modulators, supplying two klystrons with the power necessary for the two 6 meters accelerating sections, and for the buncher. The klystrons are multicavity amplifiers. The two modulators are line type with a Pulse Forming Network (PFN) short circuited by a thyratron through the primary of a pulse transformer. The secondary of this transformer supplies the klystron cathode with a 280kV pulse.

Class:	LinacRF
Module:	LinacRF
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacRF-Release_1_4
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacRF/index.html

Description:

This class will manage the Linac RadioFrequency. The three structures of the linac (buncher - section 1 - section 2) consist of coupled wave guide cavities, through which a high frequency electromagnetic wave passes at the same speed than the electrons. The electrons are adjusted to the peak of the RF wave, they are then subjected to the maximum electrical field. The phase of the section1 is the reference; phases of the RF in buncher and section 2 are matched to get the electrons adjusted to the peak of the RF wave.

Class:	LinacSYItlk
Module:	itlk_syct
Family:	Linac
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/itlk_syct/index.html

Description:

this class interfaces the Wago module which interlocks the linac if the synchrotron current is over a predefined limit. It gives the state of the interlock, the measured current and count the number of events

Class:	LinacSequencer
Module:	LinacSequencer
Family:	Linac
Author:	vedder (ESRF)
Revision:	LinacSequencer-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Linac/LinacSequencer/index.html

Description:

Sequencer server to execute the necessary sequences to start and stop the LINAC.

Class:	MSTATUS
Module:	mstatus
Family:	TACO_Interfaces
Author:	pons (ESRF)
Revision:	REL1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/mstatus/index.html

Description:

A class which computes all alarms displayed on CTRM screens

Class:	MSTATUS_ADM
Module:	mstatus_adm
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	MSTATUS_ADM-Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/mstatus_adm/index.html

Description:

General class to control the alarm system.

Class:	MachStatWrap
Module:	machstat_wrapper
Family:	TACO_Interfaces
Author:	pons (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/machstat_wrapper/index.html

Description:

A Tango wrapper for machine status Taco device server

Class:	MachineInterlock
Module:	interlock
Family:	Interlock
Author:	peru (ESRF)
Revision:	Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Interlock/interlock/index.html

Description:

This device server is dedicated to the control of the machine interlock system.

Class:	MagVacItlk
Module:	MagVacItlk
Family:	Interlock
Author:	peru (ESRF)
Revision:	BaseRelease
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Interlock/MagVacItlk/index.html

Description:

This device server is in charge of elaborating the status of the various magnet and vacuum interlocks installed in a cell.

Class:	MagVacItlkConcentrator
Module:	MagVacConcentrator
Family:	Interlock
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Interlock/MagVacConcentrator/index.html

Description:

This device server is designed to be an interface between the new control of the machine interlocks (magnet + vacuum) and the existing applications.

Class:	MasterSourceSwitches
Module:	MasterSourceSwitches
Family:	RadioFrequency
Author:	bourtemb (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/RadioFrequency/MasterSourceSwitches/index.html

Description:

This class will give the state of the mastersources switches.

Class:	Mastersource
Module:	mastersource
Family:	Measures
Author:	goetz (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/mastersource/index.html

Description:

MasterSource tango device server. This class uses the gpibDevice object.

Class:	MatrixCalc
Module:	MatrixCalc
Family:	Miscellaneous
Author:	meyer (ESRF)
Revision:
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/MatrixCalc/index.html

Description:

Tango Device Class

Class:	MchCorrector
Module:	MchCorrector
Family:	PowerSupply
Author:	yohann.lavigne (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/MchCorrector/index.html

Description:

This class is able to control the ESRF Multi Channel Corrector It uses other classes: * PowerSupplyCrate class * PowerSupplyChannel class * SRCorrectors class

Class:	MchSteerer
Module:	MchSteerer
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	MchSteerer-Release_1_9
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/MchSteerer/index.html

Description:

A multi channel steerer device should regroup all horizontal or vertical steerers of the ESRF storage ring. Reading and setting of steerer currents and voltages is done by spectrum attributes, which contain the values of the individual steerer devices.

Class:	MchSteererMixer
Module:	MchSteererMixer
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	MchSteererMixer-Release_1_6
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/MchSteererMixer/index.html

Description:

A multi channel steerer class to mix the old Taco steerer devices handled by Tango wrappers with the new Tango steerer devices on top of the Bilt power supplies.

Class:	MchSteererWrapper
Module:	MchSteererWrapper
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	MchSteererWrapper-Release_3_2
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/MchSteererWrapper/index.html

Description:

A multi channel steerer device should regroup all horizontal or vertical steerers of the ESRF storage ring. Reading and setting of steerer currents is done by spectrum attributes, which contain the values of the individual steerer devices.

Class:	MchSteererWrapperDc
Module:	MchSteererWrapperDc
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	MchSteererWrapperDc-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/MchSteererWrapperDc/index.html

Description:

Tango Device Class

Class:	MeteorWrapper
Module:	meteor_wrapper
Family:	TACO_Interfaces
Author:	meyer (ESRF)
Revision:	MeteorWrapper-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/meteor_wrapper/index.html

Description:

This is a wrapper for the TACO Meteor2 device server which can be used to handle video or exposure time cameras.

Class:	Mindstorms
Module:	Mindstorms
Family:	Miscellaneous
Author:	goetz (ESRF)
Revision:
Language:	Java
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/Mindstorms/index.html

Description:

A java class to control the LEGO minstorms robot dancing the tango.

Class:	Mitutoyo
Module:	mitutoyo
Family:	Motion
Author:	meyer (ESRF)
Revision:	Mitutoyo-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/mitutoyo/index.html

Description:

Class to control Mitutoyo absolute encoders

Class:	Modbus
Module:	RFSwitch
Family:	BeamDiag
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/RFSwitch/index.html

Description:

A Class to handle the modbus protocol over TCP/IP or Serial (RTU).

Class:	Modbus
Module:	RevolverG3
Family:	InsertionDevices
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InsertionDevices/RevolverG3/index.html

Description:

A Class to handle the modbus protocol over TCP/IP or Serial (RTU).

Class:	MultiBunchCleaning
Module:	MultiBunchCleaning
Family:	BeamDiag
Author:	pons (ESRF)
Revision:	REL_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/MultiBunchCleaning/index.html

Description:

A class for the bunch by bunch cleaning in the SR

Class:	MultiBunchFeed
Module:	MultiBunchTune
Family:	BeamDiag
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/MultiBunchTune/index.html

Description:

Implement the interface of the multibunch feedback device. The device is a client of the LiberaAccess device server and define a certain number of attributes from the FPGA parameters

Class:	MultiBunchFeed
Module:	MultiBunchFeed
Family:	Measures
Author:	chaize (ESRF)
Revision:	V2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/MultiBunchFeed/index.html

Description:

Implement the interface of the multibunch feedback device. The device is a client of the LiberaAccess device server and define a certain number of attributes from the FPGA parameters

Class:	MultiChannelEmittance
Module:	MultiChannelEmittance
Family:	BeamDiag
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/MultiChannelEmittance/index.html

Description:

This class compute an average emittance based on several local emittance device server.

Class:	MultiFastSteerer
Module:	MultiFastSteerer
Family:	Measures
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/MultiFastSteerer/index.html

Description:

This class is dedicated to the control of multiple fast steerers, enabling global settings like "set all to ON" or "set all to OFF".

Class:	MultiInterlock
Module:	MultiInterlock
Family:	Interlock
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Interlock/MultiInterlock/index.html

Description:

This device server implements high level synthesis of the numerous machine interlock relays.

Class:	MultibunchPLL
Module:	MultibunchPLL
Family:	BeamDiag
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/MultibunchPLL/index.html

Description:

This device server agregates some TACO and TANGO device servers in order to present a useful interface in matter of multibunch phase control.

Class:	MultipleAxes
Module:	MultipleAxes
Family:	Motion
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/MultipleAxes/index.html

Description:

This class agregate together several devices deriving from the Motor abstract class. The position of each sub motor is mapped in an attribute and the state of the device is calculated with a combination of the states of each motors

Class:	OcemPS
Module:	OcemPS
Family:	PowerSupply
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/OcemPS/index.html

Description:

This class interfaces the septum control powersupply from Ocem. At ESRF it is used to control the storage ring injection septums. This class is a refurbished version of the former TACO ocem class.

Class:	PLCvacuumValve
Module:	plc_vac_valve
Family:	Vacuum
Author:	peru (ESRF)
Revision:	V2-1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/plc_vac_valve/index.html

Description:

Vacuum valve control though a PLC.

Class:	PSFlexibility
Module:	PSFlexibility
Family:	PowerSupply
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/PSFlexibility/index.html

Description:

This device server is dedicated to the diagnostics of the power supply flexibility system.

Class:	PSGPowerSupplyChannel
Module:	PowerSupplyChannel
Family:	PowerSupply
Author:	yohann.lavigne (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/PowerSupplyChannel/index.html

Description:

This class is able to control the ESRF Power Supply for administrate channel It uses other classes: * PowerSupplyCrate class * SRCorrectors class * MchCorrector class

Class:	PSGPowerSupplyCrate
Module:	PowerSupplyCrate
Family:	PowerSupply
Author:	yohannlavigne (??)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/PowerSupplyCrate/index.html

Description:

This class is able to control the ESRF Power Supply for administrate Crate It uses other classes: * PowerSupplyChannel class * SRCorrectors class * MchCorrector class

Class:	Paragon
Module:	paragon
Family:	Motion
Author:	vedder (ESRF)
Revision:	Paragon-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/paragon/index.html

Description:

A class to control stepper motors with the DIN Rail Stepper Drive L25i/L50i.

Class:	ParagonSlit
Module:	paragon_slits
Family:	Motion
Author:	meyer (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/paragon_slits/index.html

Description:

control 4 axis and building 4 values vertical offset, vertical gap, horizontal offset and horizontal gap.

Class:	PinDiodeID14eh3
Module:	pindiode
Family:	Measures
Author:	meyer (ESRF)
Revision:	PinDiodeID14eh3-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/pindiode/index.html

Description:

Pin Diode readout for ID14-3 mono control using NI EDAQ board and COMEDI

Class:	PowerConsumption
Module:	PowerConsumption
Family:	Hqps
Author:	goudard (ESRF)
Revision:	releasetag
Language:	Python
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/PowerConsumption/index.html

Description:

This class is part of the HQPS project. Its aim is to give measurement of the power used by the Esrf. The power used by the ESRF is plitted on 2 lines called Process Facility. A third info is the total power consumed by the ESRF (sum of the other two). This class also reports the Geg 10 mins top date

Class:	PssEquip
Module:	pssequip
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:	Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/pssequip/index.html

Description:

Tango Device Class

Class:	QpoleMotorization
Module:	qpole_motorization
Family:	Motion
Author:	peru (ESRF)
Revision:	Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/qpole_motorization/index.html

Description:

This device server is intended to control the motorization of a quadripole.

Class:	RFCavityWrapper
Module:	RFCavityWrapper
Family:	RadioFrequency
Author:	vedder (ESRF)
Revision:	FirstRelease
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/RadioFrequency/RFCavityWrapper/index.html

Description:

This TANGO class will wrap TACO High level server for the control of the rf cavities.

Class:	RFKlystronWrapper
Module:	RFKlystronWrapper
Family:	RadioFrequency
Author:	bla (??)
Revision:	FirstRelease
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/RadioFrequency/RFKlystronWrapper/index.html

Description:

This Tango class is used to wrap a sy/rf-tra/tra* taco server.

Class:	RFSrrf
Module:	RFSrrf
Family:	Miscellaneous
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/RFSrrf/index.html

Description:

Class for the SRRF application, collecting data from various transmitters to compute RF switches.

Class:	SAdc150
Module:	SAdc150
Family:	InputOutput
Author:	vedder (ESRF)
Revision:	SAdc150-Release_1_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/SAdc150/index.html

Description:

This device server will control any channel of the ADAS ICV150 analog to digital converter board.

Class:	SDac712
Module:	SDac712
Family:	InputOutput
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/SDac712/index.html

Description:

This device server will control any channel of the ADAS ICV712 digital to analog converter board.

Class:	SRCorrectors
Module:	SRCorrectors
Family:	PowerSupply
Author:	yohann.lavigne (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/SRCorrectors/index.html

Description:

This class is able to control the ESRF SRCorrectors. It uses other classes: * PowerSupplyCrate class * PowerSupplyChannel class * MchCorrector class

Class:	SRTuneSelector
Module:	SRTuneSelector
Family:	BeamDiag
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/BeamDiag/SRTuneSelector/index.html

Description:

This class is used to select a Tune H/V value and store it into data collector.

Class:	SRVacItlk
Module:	SRVacItlk
Family:	Vacuum
Author:	chaize (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/SRVacItlk/index.html

Description:

this class implement the logic for calculating the state of the vacuum interlock in a storage ring vacuum cell. It takes in account both the state of the PLCVacuumValve device state and the corresponding state of GlobalVacItlk

Class:	ScraperWrapper
Module:	ScraperWrapper
Family:	TACO_Interfaces
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/ScraperWrapper/index.html

Description:

A Tango device server wrapping the scraper Taco device server.

Class:	ScreenManager
Module:	ScreenManager
Family:	Miscellaneous
Author:	pons (ESRF)
Revision:	REL1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/ScreenManager/index.html

Description:

A class to manage insertion and extraction of the screens of the machine.

Class:	Sequencer
Module:	sequencer
Family:	Beamlines
Author:	meyer (ESRF)
Revision:	Sequencer-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Beamlines/sequencer/index.html

Description:

Tango server to run ID14 sequences. An interface to start and stop sequences and to survey the sequence state during execution.

Class:	Settingserv
Module:	settingserv
Family:	Miscellaneous
Author:	meyer (ESRF)
Revision:	Settingserv-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/settingserv/index.html

Description:

manage a list of attribute setpoint in configuration files

Class:	SextupoleServer
Module:	sy_sextu_wrapper
Family:	PowerSupply
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/sy_sextu_wrapper/index.html

Description:

This is a tango wrapper to access old tango release of the Sy Sextupole server.

Class:	Sextupoles
Module:	sextupoles
Family:	PowerSupply
Author:	perez (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/sextupoles/index.html

Description:

Tango Device Class

Class:	SimAxis
Module:	SimAxis
Family:	Miscellaneous
Author:	penel (ESRF)
Revision:	Release-1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/SimAxis/index.html

Description:

Tango Device Class

Class:	SineWave
Module:	sinewave
Family:	PowerSupply
Author:	peru (ESRF)
Revision:	Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/sinewave/index.html

Description:

This device server controls the harmonic compensator hardware. The control is operated through a serial line using the JBUS binary protocol.

Class:	SrID
Module:	SrID
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	releasetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/SrID/index.html

Description:

This class is able to survey all storage ring ID's. It is maily used to store attribute history for all ID gaps.

Class:	SrpsEarthLeak
Module:	sr_earth_leak
Family:	Measures
Author:	goudard (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/sr_earth_leak/index.html

Description:

This Class is a server to get and convert data recieved from icv150 in vme026.

Class:	StanfordDG645
Module:	StanfordDG645
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/StanfordDG645/index.html

Description:

This device server is intended to control a SRS DG645 delay generator.

Class:	Steerer
Module:	Steerer
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	Steerer-Release_1_8
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/Steerer/index.html

Description:

The steerer device combines the three channels of the BILT power supply into a horizontal and a vertical correction current.

Class:	SteererWrapper
Module:	SteererWrapper
Family:	PowerSupply
Author:	meyer (ESRF)
Revision:	SteererWrapper-Release_1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/SteererWrapper/index.html

Description:

To mix old Taco steerer devices and new Tango steerer devices the Taco steerers need to be wrapped with a Tango interface.

Class:	StoreServer
Module:	storeserver
Family:	TACO_Interfaces
Author:	meyer (ESRF)
Revision:	StoreServer-Release_2_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/storeserver/index.html

Description:

Store attribute and state values to HDB. Values can be surveyed on TANGo device servers, TACO device servers and SPEC versions (only SPEC server mode).

Class:	SyItlkWrapper
Module:	SyItlkWrapper
Family:	TACO_Interfaces
Author:	verdier (ESRF)
Revision:	SyItlkWrapper-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/SyItlkWrapper/index.html

Description:

This class is able to wrap an ESRF booster TACO interlock device. It gives magnet states for tunnel zone (using intelock TACO device and Bpss Tango device).

Class:	SySextuSynchro
Module:	synchro_sextu
Family:	PowerSupply
Author:	verdier (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/synchro_sextu/index.html

Description:

To synchronize the SY sextupoles TANGO device server with BPSS, this class read data collector and gives the Dipole period to the sextupoles device server, if this period has changed.

Class:	SySextupoleChannel
Module:	SySextupoleChannel
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	SySextupoleChannel-Release_1_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/SySextupoleChannel/index.html

Description:

This is a Tango device server to control the Booster Sextupoles single channels.

Class:	SySextupoles
Module:	SySextupoles
Family:	PowerSupply
Author:	bourtemb (ESRF)
Revision:	SySextupoles-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/PowerSupply/SySextupoles/index.html

Description:

This class will control the 2 sextupoles channels (On, Off, Reset commands), will manage the operation files and will update the period value of the sextupole driver (read on BPSS).

Class:	SyTune
Module:	sy-tunemon
Family:	Measures
Author:	meyer (ESRF)
Revision:	SyTune-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/sy-tunemon/index.html

Description:

This class implements the tune measurement for the booster synchrotron. A number of tune values should be calculated for an acceleration cycle of the booster. A shaker is used to exite the beam and the data is taken from the turn by turn beam position measurement of Libera devies. Two devices are used. One for the measurement in the horizontal plane and another one for the vertical plane.

Class:	TDKLambdaGenesys
Module:	TdkGenesysPsDs
Family:	Miscellaneous
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/TdkGenesysPsDs/index.html

Description:

TDKLambdaGenesys-Genesys family power supply (e.g. Gen 100 100) by TDK-Lambda

Class:	Table3p
Module:	table3p
Family:	Beamlines
Author:	meyer (ESRF)
Revision:	Table3p-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Beamlines/table3p/index.html

Description:

the physical device is a table supported by 3 legs. 1 leg on the front side, eahc leg is equiped with a stepper motor allowing to change the height of the leg. 2 legs on the back side. 2 stepper motors allow to horizontally translate the front leg or the 2 back legs. The present class, defines 2 translations (vertical and horizontal) and 3 rotations around a center of rotation.

Class:	TacoBpmonup
Module:	taco_bpm_wrapper
Family:	TACO_Interfaces
Author:	peru (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/taco_bpm_wrapper/index.html

Description:

This device is a Tango wrapper for the Taco Bpmonup device server.

Class:	TacoCcd
Module:	tacoccd
Family:	Measures
Author:	meyer (ESRF)
Revision:	TacoCcd-Release_2_5
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/tacoccd/index.html

Description:

This is a wrapper for the old Taco ccd interface

Class:	TacoDevSpy
Module:	taco_dev_spy
Family:	TACO_Interfaces
Author:	goudard (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/taco_dev_spy/index.html

Description:

Spy to record (set-read) variations on a TACO device who have DevReadValue command.

Class:	TacoRelay
Module:	TacoRelay
Family:	InputOutput
Author:	bourtemb (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/TacoRelay/index.html

Description:

Wrapper tango for the taco pulsed relays.

Class:	TuneMonitor
Module:	tunemon
Family:	Measures
Author:	verdier (ESRF)
Revision:	realisetag
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/tunemon/index.html

Description:

This class is able to calculate beam tune using ECDR compact PCI board. This board has two input channel (vertical and horizontal) each one is separated in two sub-channel (vertic_1, vertic_2, horiz_1, horiz_2).

Class:	TuneServer
Module:	TuneServer
Family:	Measures
Author:	chaize (ESRF)
Revision:	Release_2_variable_spec_size
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/TuneServer/index.html

Description:

This is the Tune server. This server interact with the Agilent_4395a server and the Taco tune server. Almost all functionnalities of Tune Monitor application will be deported in this server, like peak tracking, shaker driving ect.

Class:	TuneServer2
Module:	TuneServer2
Family:	Measures
Author:	verdier (ESRF)
Revision:	TuneServer2-Release_1_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/TuneServer2/index.html

Description:

Class:	VacCellGauge
Module:	cell_gauges
Family:	Vacuum
Author:	verdier (ESRF)
Revision:	VacCellGauge-Release_1_5
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/cell_gauges/index.html

Description:

This class is able to manage vacuum gauges in a cell.

Class:	VacHumidity
Module:	vac_humidity
Family:	Vacuum
Author:	peru (ESRF)
Revision:	Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/vac_humidity/index.html

Description:

This server handles humidity captor for vacuum, and store it into HDB.

Class:	VacTemperature
Module:	vac_temperatures
Family:	Vacuum
Author:	peru (ESRF)
Revision:	Release_3_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/vac_temperatures/index.html

Description:

This class manages vacuum temperature through PLCmodbus.

Class:	VacTemperature
Module:	vac_temp
Family:	Vacuum
Author:	peru (ESRF)
Revision:	Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Vacuum/vac_temp/index.html

Description:

This is a modernized version of the "VacTemperature" device server.

Class:	Vdsp71Wrapper
Module:	Vdsp71Wrapper
Family:	TACO_Interfaces
Author:	taurel (ESRF)
Revision:	Vdsp71Wrapper-Release_1_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/TACO_Interfaces/Vdsp71Wrapper/index.html

Description:

This class is able to wrap a Vdsp71_cs TACO device.

Class:	VideoSynopsisDs
Module:	videosynopsis
Family:	Miscellaneous
Author:	pons (ESRF)
Revision:	keyword substitution
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/videosynopsis/index.html

Description:

A class to manage images interleaved with the video synopsis.

Class:	VirtualPrinter
Module:	VirtualPrinter
Family:	Hqps
Author:	taurel (ESRF)
Revision:	Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Hqps/VirtualPrinter/index.html

Description:

This class simulates the printer normallly connected to the PLC's used in the HQPS project. There is one virtual printer per PLC.

Class:	VpapMotor
Module:	vpapmotor
Family:	Motion
Author:	chaize (ESRF)
Revision:	V1_3
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Motion/vpapmotor/index.html

Description:

This class implement Tango devices for each axe of a VpapMotor VME board

Class:	Vrif
Module:	Vrif
Family:	Miscellaneous
Author:	vedder (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Miscellaneous/Vrif/index.html

Description:

This class handles VRIF board that perform checks on VME bus, throught Fbus.

Class:	WagoAdc
Module:	wagoadc
Family:	InputOutput
Author:	meyer (ESRF)
Revision:	WagoAdc-Release_2_0
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/wagoadc/index.html

Description:

Instanciate one object per adc channel

Class:	Wagojacks
Module:	wagojacks
Family:	InputOutput
Author:	chaize (ESRF)
Revision:	Wagojacks-Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/InputOutput/wagojacks/index.html

Description:

class to handle a jacks controlled via a wago controller. A jack should have a digital output to send the command 2 digital inputs to detect the position of the jack.

Class:	WaveMaster
Module:	wavemaster
Family:	Measures
Author:	verdier (ESRF)
Revision:	Release_2_1
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/wavemaster/index.html

Description:

This class is able to controle a Lecroy WaveMaster Oscilloscope.

Class:	XfrEff
Module:	transfer_efficiency
Family:	Measures
Author:	epaud (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/transfer_efficiency/index.html

Description:

This device server handles the Machine Transfer Efficiency hardware based a CUB C-PCI card equipped with an add-on mezzanine card. This card hold a virtex programmable component were computing algorithms are loaded.

Class:	currentTransformer
Module:	ct-server
Family:	Measures
Author:	verdier (ESRF)
Revision:
Language:	C++
Hosted:	ESRF (cvs) repository
Doc.:	http://www.esrf.fr/computing/cs/tango/tango_doc/ds_doc/ESRF/Measures/ct-server/index.html

Description:

This server normally handles only one PCT device.

TANGO is an open source project hosted by :

Core and Tools : CVS repository on tango-cs project
Device Servers : CVS repository on tango-ds project