| Device Properties |
| Property name |
Property type |
Description |
| Ccd_device |
Tango::DEV_STRING |
Nane of the ccd device |
| Bpm_device |
Tango::DEV_STRING |
Nane of the bpm device |
| Ct_device |
Tango::DEV_STRING |
Name of the current transformer device used to detect an available beam. |
| Pixel_size |
Tango::DEV_DOUBLE |
Pixel size in the image in um |
| Beta_vertical |
Tango::DEV_DOUBLE |
The vertical Beta value at source-point |
| Beta_horizontal |
Tango::DEV_DOUBLE |
The horizontal Beta value at source-point |
| Optical_error |
Tango::DEV_DOUBLE |
Optical errors in um |
| Photon_divergence |
Tango::DEV_DOUBLE |
Photon divergence [urad fwhm] |
| Source_distance |
Tango::DEV_DOUBLE |
Distance [m] source point to scintillator screen |
| Magnification |
Tango::DEV_DOUBLE |
Magnification factor for the emittance calculation |
| Full_image_height |
Tango::DEV_LONG |
Full hight of the image to be analysed. The middle of the image size is used as
reference to calculate the peak position in Y. |
| Full_image_width |
Tango::DEV_LONG |
Full width of the image to be analysed. The middle of the image size is used as
reference to calculate the peak position in X. |
| Min_gain |
Tango::DEV_DOUBLE |
Minimum gain for the gain interval used by the automatic calibration |
| Max_gain |
Tango::DEV_DOUBLE |
Maximum gain for the gain interval used by the automatic calibration |
| Min_exposure |
Tango::DEV_DOUBLE |
Minimum exposure time for the exposure time interval used by the automatic calibration |
| Max_exposure |
Tango::DEV_DOUBLE |
Maximum exposure time for the exposure time interval used by the automatic calibration |
| Pinhole_camera |
Tango::DEV_BOOLEAN |
Indicates that the camera is used as a pinhole camera. A different formula
is used to calculate the beam emittance.
In this case the necessary parameters for the calculation are searched as
free properties under the name given as pinhole_config_prop. |
| Pinhole_config_prop |
Tango::DEV_STRING |
The name of the free property where to find the parameters for the
pinhole emittance calculation. |
| Cof1 |
Tango::DEV_DOUBLE |
Coefficient 1 for pinhole emittance calculation in the vertical plane. |
| Cof2 |
Tango::DEV_DOUBLE |
Coefficient 2 for pinhole emittance calculation in the vertical plane. |
| Cof3 |
Tango::DEV_DOUBLE |
Coefficient 3 for pinhole emittance calculation in the vertical plane. |
| Cof4 |
Tango::DEV_DOUBLE |
Coefficient 4 for pinhole emittance calculation in the vertical plane. |
| Ccd_frame_rate |
Tango::DEV_DOUBLE |
The camera frame rate to be applied to the ccd device when switching on
the emittance calculation. |
