States |
Names |
Descriptions |
FAULT |
The device is in FAULT state when an error is detected,
after the power up of the powersupply
and after a change from LOCAL to REMOTE mode. |
OFF |
No pulse in the magnet |
ON |
Normal mode of operation (Pulse sent to the magnet) |
DISABLE |
This state corresponds to the LOCAL mode.
Entered by a switch on the front panel of the powersupply. |
ALARM |
An attribute is in alarm.
For example when the read and set values are too much different. |
UNKNOWN |
There is a communication problem with the IO, ADC or DAC board. |