This pages lists:

^ What is a CRG?

Several so-called bending-magnet beamlines at the ESRF are operated independently by Collaborating Research Groups (CRGs). Each CRG maintains a research program independent of the ESRF, and most serve specific national communities. Currently (2024) there are 12 CRGs, operating with continuous success 14 end-stations.

For legal purposes, CRGs are established at the ESRF as third-party contractors. They operate on a non-profit basis and reimburse ESRF for all costs incurred. In return for the photons they receive from the ESRF storage ring, CRGs make beam time available through ESRF’s public user program. They have access to services ESRF provides to its insertion-device beamlines, and they follow ESRF safety procedures and, wherever feasible, ESRF technical standards. More is explained below about the history of CRGs.

^ How is CRG beamtime accessed?

There are two routes to access beamtime on a CRG:

  • One-third of the scheduled beamtime on CRG beamlines is managed through the ESRF public user program, with proposals being submitted twice a year.
  • The remaining two-thirds of the scheduled beamtime are “private” and allocated by each CRG’s own beamtime allocation procedure.

Both routes are handled through the ESRF User Portal. While all efforts are made to make proposal submission as consistent as possible, by the nature of CRGs, the procedures to apply for private beamtime may differ slightly from beamline to beamline. The CRG Liaison Office can advise on proposal submission for CRGs.

^ How does the CRG Liaison Office help?

As third-party contractors, CRGs do not necessarily have in-depth knowledge of ESRF structures, and vice versa. Hence, the CRG Liaison Office was created as a central contact service which:

  • Provides administrative assistance to the CRGs with respect to both user administration and follow-up of CRG purchases and budget lines,
  • Participates in the maintenance and development of IT-based user administration procedures,
  • Provides general secretarial assistance to CRGs,
  • Supports CRGs with technical assistance (from day-to-day troubleshooting to large beamline infrastructure projects) and establishes the necessary communication links between CRGs and the ESRF service divisions.

^ Who constitutes the CRG Liaison Office?

Michael Hahn (CRG Liaison Engineer) and Eric Dettona (CRG engineer) advise the CRGs on all technical matters relating to the installation, construction and operation of these beamlines and instruments.

To ensure proper administration of the CRG user program and finances, the CRG office employs up to three secretaries: Valérie Clement, Vicky Herbuveaux and Fatou Bigué Ndiaye (CRG secretaries) responsible for user program, CRG staff administration, CRG finances and tasks like site entry administration as well as all interfacing to all ESRF administrative services.

Contact Telephone  Mail 
CRG Liaison Office: Working hours: 08:00-17:00 +33 (0)4 76 88 25 02  mail

Axel Kaprolat, CRG Liaison Group Head

Thomas Buslaps, Deputy Group Head

+33 (0)4 76 88 24 35

+33 (0)4 76 88 26 84

 mail

 mail
Fatou Bigué Ndiaye, Administrative Assistant +33 (0)4 76 88 25 02  mail
Valérie Clement, Part time Adm. Assistant +33 (0)4 76 88 20 73  mail
Vicky Herbuveaux, Administrative Assistant +33 (0)4 76 88 24 59  mail
Eric Dettona, Technical project manager +33 (0)4 76 88 23 02  mail

^ What is the history of CRGs?

The ESRF originally was designed and funded as a third-generation synchrotron radiation facility which would provide insertion-device (ID) X-ray sources. However, it became clear in the early stages of development of the facility, that the member countries’ scientific communities could as well benefit from the use of the radiation generated by ESRF’s bending magnets (BM). These sources, although less intense than the ID sources can, with appropriate focusing optics, produce x-ray beams with intensity at sample position which exceeded that found in many national facilities at that time.

It was therefore agreed in 1990 that scientists from the ESRF’s member countries could form groups to exploit these BM sources, provided that this use diverts neither manpower nor funds from the main ESRF program. These groups, which design, construct and operate their own beamlines, came to be called Collaborating Research Groups (CRGs).

With the installation of the EBS (Extreme Brilliant Source) from 2019 to 2920, a complete new electron storage ring replaced the old source. The so-called HBMA lattice of this new machine was optimized to provide a much smaller horizontal emittance for the ID-sources, which, by definition involved more (7 per unit cell), but weaker bending magnets, which were not attractive as source for the CRG beamlines as before. It was therefore decided to put dedicated small insertion devices as new source for all CRG beamlines, depending on preferences these can vary between mainly small single bending magnets and 2 pole wigglers.